Browse: Machinery Electrical

Electric & Power >

Generators >

Generators, A.C., 3/60 Hz, W/O Driving Unit, Generator Ends

GENERATORS, A.C., 3/60 HZ, W/O DRIVING UNIT, GENERATOR ENDS

There are 291 listings in this category
Update: Sat, May 18, 2024 12:10:18

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

6 KW, 1000 RPM, Leroy #LSA38M6, Gen End, 60hz, 1 Phase, new

Collicutt Energy Services, Red Deer, AB 403-309-9250 (Email: norm.bota@collicutt.com) Norm Bota

15 KW, 515 RPM, Winco #W15PTOS-3/F, generator end, 120/240 Volts, 1-phase, 2-pole, 2023, new

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

15 KW, 515 RPM, Winco, generator end, 120/240 Volts, 1-phase, 2-pole, 2023, new

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

15 KW, 540 RPM, Winco #W15PTOS-3/F, generator end, 120/240 Volts, 1-phase, 2-pole, 2023, new

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

19 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

20 KW, 1200 RPM, General Motors generator, 230 Volts, 3 phase (2 available)

A & H Armature Works, Inc, Westwego, LA 504-347-3781 (Email: ahmail@bellsouth.net) Harry Atwood

22 KW Gentec #40E232X157G1, Induction Generator, 230/460 V, 73/38 Amps, 1800 RPM, 3 phase Hydraulics

Machinery & Equipment Co, Brisbane, CA 415-467-3400 (Email: dominic@machineryandequipment.com) Dominic Piazza

30 KW, 1200 RPM, IEC GM generator, 230 Volts, 3 phase

A & H Armature Works, Inc, Westwego, LA 504-347-3781 (Email: ahmail@bellsouth.net) Harry Atwood

30 KW, 1800 RPM, Kohler #GCC-257719, generator end, 12 lead, 120/208/240/416/480 Volts, new surplus, 2018 (30 available)

Green Industrial LLC, Belgium, WI 262-476-5045 (Email: mike@gibuys.com) Michael Rick

40 KW, 1200 RPM, Delco, 1-bearing generator, 480/240 Volts, 3 phase

A & H Armature Works, Inc, Westwego, LA 504-347-3781 (Email: ahmail@bellsouth.net) Harry Atwood

40 KW, 1800 RPM, Caterpillar #LC, generator end, 277/480 Volts, 3-phase

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

40 KW, 1800 RPM, Kohler #GCC-257720, generator end, 12 lead, 120/208/240/416/480 Volts, new surplus, 2018 (24 available)

Green Industrial LLC, Belgium, WI 262-476-5045 (Email: mike@gibuys.com) Michael Rick

50 KW, 540 RPM, Winco, generator end, 120/240 Volts, 1-phase, 4-pole, 2023, new

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

50 KW, 540 RPM, Winco, generator end, 120/240 Volts, 1-phase, 4-pole, 2023, new

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

60 KW, 1800 RPM, Stamford, generator end, 480 Volts, 3-phase, 389 hours, John Deere 4045T engine

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

60 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

75 KW, 1800 RPM, General Motors, Frame 150, single bearing, rebuilt, 480 Volts

A & H Armature Works, Inc, Westwego, LA 504-347-3781 (Email: ahmail@bellsouth.net) Harry Atwood

75 KW, 1800 RPM, Stamford Newage #UCDI224F1L, generator end

Industrial Motor Power Corp, Encino, CA 323-268-3380 (Email: sales@impcorporation.com) Sales Dept.

84 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

100 KW, 1800 RPM, IEC / Delco #G415JAY-002, generator end, 480 Volts, 3-phase, Frame 150, 12 wire, S/N #EH-24123

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

113 KW, Marathon 362PSL1606 Magna Plus, 480 Volts, 12 lead, w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

125 KW, 1200 RPM, Columbia, Frame 3214, Drip-Proof Ball Bearing, 2-bearing, 208Y/120

Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris

126 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

130 KW, 1800 RPM, Marathon #440FDC4646FF, generator end, 480 Volts, 3-phase, Frame 440, Caterpillar G3306 engine removed, #1 housing

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

132 KW, 1800 RPM, Weg, mod.#OTA250, BB, new surplus

Gulf Electroquip Inc, Houston, TX 713-675-2525 (Email: jim@gulfelectroquip.com) Jim Petersen

150 KW, 1800 RPM, Marathon, generator end, 240-208Y/416-480Y Volts, single bearing

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

150 KW, 1800 RPM, Marathon, generator end, 240-208Y/416-480Y Volts, Frame 431

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

150 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

150 KW, Marathon 363PSL1607 Magna Plus, 480 Volts, 12 lead w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

156 KVA, 1800 RPM, Reliance, 3 Phase, Brushless

Boundary Electric Ltd, Grand Forks, BC 250-442-5561 x237 (Email: rob@boundaryelectric.com) Rob Payne

175 KW, 1200 RPM, Bemac II, generator end, 480 Volts, 3-phase, Caterpillar G379 engine removed, 00 housing

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

180 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

200 KW, 1200 RPM, Kato, generator end, 277/480 Volts, 3-phase

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

200 KW, 1800 RPM, Marathon #432PSL6256, generator end, sound attenuated enclosure 0

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

210 KW, 1200 RPM, Kato #175-68331111, SAE-00, 12 wire

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

225 KW, Marathon 431PSL6206 Magna Plus, 480 Volts, 12 lead w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

250 KW, 1800 RPM, Kato #A233340005, 480 Volts, 10 wire, sound attenuated enclosure 1, rebuilt

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

250 KW, 1800 RPM, Marathon Electric #433PSL6266, generator end only, 480 Volts, 3-phase, Frame 433, 0 Housing

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

250 KW, 1800 RPM, 312.5 KVA, 2400/4160 Volts, 3 Phase

Boundary Electric Ltd, Grand Forks, BC 250-442-5561 x237 (Email: rob@boundaryelectric.com) Rob Payne

300 KVA, 327 RPM, General Electric alternator, 125 VDC excitation .8pf.

Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris

300 KW, 1200 RPM, Bemac #II, brushless, 240/480V., generator end

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

300 KW, 1200 RPM, Caterpillar #KATO-6P4-1900, 12 wire

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

300 KW, 1200 RPM, Kato, 480 Volts, sound attenuated enclosure 00, brushless, rebuilt

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

300 KW, 1200 RPM, Kato, generator end, Caterpillar engine, 277/480 Volts, 3-phase

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

300 KW, 1200 RPM, Kato, 277/480 Volts, 1 brg, off Caterpillar D-353E

S & W Power Systems & Engine, Oklahoma City, OK 405-677-6637 (Email: Derek@swpowersystems.net) Derek Neher

300 KW, 1800 RPM, Caterpillar #SR4, generator end, 240/480 Volts, 3-phase, 3506 engine,

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

300 KW, 1800 RPM, Cummins, generator end, 277/480 Volts, 3-phase, 564 hours, Cummins NTA855G2 engine

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

300 KW, 1800 RPM, Marathon/DMT, Generator End, 120/208 Volts, 3 phase, SAE1, 646 hours

Pacific Electric Power Generators, Mission Hills, CA 818-667-7520 (Email: joe@pacificpowergenerators.com) Joe Galindo

300 KW, Cummins CC434E / Newage Stamford Genend, 480 Volts 3 phase SAE1, 130 hours

Pacific Electric Power Generators, Mission Hills, CA 818-667-7520 (Email: joe@pacificpowergenerators.com) Joe Galindo

300 KW, Weg #GTA315M148, 375 KVA, 480 Volts, generator end

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

310 KW, Marathon 432PSL6246 Magna Plus, 600/346 Volts, 4 lead, PM, DVR2400, w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

310 KW, Marathon 432PSL6212 Magna Plus, 480 Volts, 12 lead, w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

320 KW, 1800 RPM, Caterpillar #SR4, generator end, 120/208 Volts, 3-phase, sound attenuated enclosure 1, 2015

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

350 KW, 1800 RPM, Kohler, generator end, Detroit generator set, 208/240 Volts, 3 phase, 12 wire, 312 hours, #1 housing

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

350 KW, 1800 RPM, Marathon, generator end, 480 Volts, 3-phase, sound attenuated enclosure #1

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

350 KW, 1800 RPM, Marathon, generator end, John Deere 6125 diesel engine, 480 Volts, 3-phase, #1 housing

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

350 KW, 1800 RPM, Stamford #HCI434F1, generator end, 480 Volts, 3-phase, Cummins GTA19 engine, 1462 hours, Frame 434

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

395 KW, 1000 RPM, Caterpillar SR4, generator end alternator, new surplus, 260/450 Volts

S & W Power Systems & Engine, Oklahoma City, OK 405-677-6637 (Email: Derek@swpowersystems.net) Derek Neher

400 KW, 1200 RPM, Delco, 10-leads, 2-bearing-ball.dbl.-shaft, 208/240/480 VAC

Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris

400 KW, 1200 RPM, Leroy Somer #MTG616, 480 Volts

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

400 KW, 1800 RPM, Caterpillar #SR4, generator end, 480 Volts, 3-phase, 3412 engine, Frame 585

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

400 KW, 1800 RPM, Caterpillar #SR4, generator end, sound attenuated enclosure #1

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

400 KW, 1800 RPM, Caterpillar #SR4, generator end, 480 Volts, 3-phase

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

400 KW, 1800 RPM, Caterpillar #SR4B, generator end, 480 Volts, 3-phase, Frame 450, #1 Housing

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

400 KW, 1800 RPM, Kato, 480 Volts

Field Engine LLC, San Antonio, TX 210-380-5187 (Email: fielden@fieldengine.net) Guy Fielden

400 KW, Marathon 433PSL6216 Magna Plus, 480 Volts, 12 lead, VR-SE350, w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

405 KW, Marathon Electric #571RSL2029A-P451, generator end, 240/480 Volts, 3-phase, Detroit 8V92 engine, Frame 571

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

430 KW, Marathon 433PSL6248 Magna Plus, 600/346 Volts, 4 lead, PM, DVR2400

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

450 KW, 1200 RPM, Kato #350SR9D, sound attenuated enclosure 00, plates

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

500 KW, 1200 RPM, Kato #500SR9D, 277/480 Volts, rebuilt, sound attenuated enclosure 00

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

500 KW, 1200 RPM, Kato, 480 Volts

Field Engine LLC, San Antonio, TX 210-380-5187 (Email: fielden@fieldengine.net) Guy Fielden

500 KW, 1800 RPM, Caterpillar #SR4, generator end, 240/480 Volts, sound attenuated enclosure, rblt 2022

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

500 KW, 1800 RPM, Kato, 480 Volts, sound attenuated enclosure #0, ABS classed, 60 Hz

Pan American Power, Covington, LA 985-893-1271 (Email: eddie@panampower.com) Eddie Boudreau

625 KVA, 1800 RPM, Kato #500-413361121,500 KW, Ty.19023, dbl.brg, 277/480 Volts

A & H Armature Works, Inc, Westwego, LA 504-347-3781 (Email: ahmail@bellsouth.net) Harry Atwood

500 KW, 1800 RPM, Marathon #574FSM2529APW, generator end, 2400 Volts, Frame 574, double bearing

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

500 KW, Bemac II, generator end, 277/480 Volts, 3-phase, Caterpillar 398 engine, Frame 727

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

510 KW, Marathon 572RSS4270 Magna Max, 600/346 Volts, 4 lead, PM, DVR2400

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

515 KW, Marathon #572RSL6425 Magna Max, 12 lead, w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

560 KW, 1800 RPM, Marathon #572RSL4027, generator end, 277/480 Volts, 3-phase, #1 housing, Frame 572

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

565 KW, 1800 RPM, Caterpillar #SR-MP, generator end, 346/600 Volts, 3-phase, sound attenuated enclosure 1, 2019

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

565 KW, 1800 RPM, Caterpillar #SRMP, generator end, 690 Volts, 591 Amps. Frame 936

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

580 KW, 1500 RPM, Marathon 574NSL5254, genend/alternator, 110/220 Volts

Mid-America Engine Inc, Warrior, AL 205-590-3505 (Email: sales@maegen.com) Sales Dept.

590 KW, 1800 RPM, Caterpillar, SR4, 480 Volts, sound attenuated enclosure #0, ABS classed, 60 Hz

Pan American Power, Covington, LA 985-893-1271 (Email: eddie@panampower.com) Eddie Boudreau

600 KW, 1200 RPM, Brown Boveri / Kato, 277/480 Volts, 1-brg., off cat D-3508TA (4 available)

S & W Power Systems & Engine, Oklahoma City, OK 405-677-6637 (Email: Derek@swpowersystems.net) Derek Neher

600 KW, 1200 RPM, Caterpillar #SRCR, generator end

Industrial Motor Power Corp, Encino, CA 323-268-3380 (Email: sales@impcorporation.com) Sales Dept.

600 KW, 1200 RPM, General Electric, Frame 9309S, DP, 2 BB, D-16", 480 Volts

Gulf Electroquip Inc, Houston, TX 713-675-2525 (Email: jim@gulfelectroquip.com) Jim Petersen

600 KW, 1200 RPM, Kato #6P6-2150, 277/480 Volts, rebuilt

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

600 KW, 1800 RPM, Blue Star #VD600-01, diesel engine generator units w/base tank

RAAR Group USA, Redondo Beach, CA 310-487-3800 (Email: Rick.raargroup@gmail.com) Rick Schotts

600 KW, 1800 RPM, Kato #A253350000, generator end, 277/480 Volts, 3-phase

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

600 KW, Marathon 572RSS4272 Magna Max, 600/346 Volts, 4 lead, PM, DVR2400

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

600 KW, Marathon 572RSL6431 Magna Max, 480 Volts, 12 lead, PM, VR-PM500 w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

670 KW, 1200 RPM, Kato #670-6633-6111, generator end, 277/480 Volts, good used

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

700 KW, 1200 RPM, General Electric, Frame 8309, DPSB, brushless, 3/60/480 VAC

Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris

700 KW, 1200 RPM, Kato #600SS9D, generator end

Industrial Motor Power Corp, Encino, CA 323-268-3380 (Email: sales@impcorporation.com) Sales Dept.

700 KW, Caterpillar #SR4B, 480V., single,.7333 pitch, digital voltage reg, 12 lead, frame 595, arrgt 1366607

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

720 KW, 1500 RPM, Marathon 575NSL5253, genend/alternator, 110/220 Volts

Mid-America Engine Inc, Warrior, AL 205-590-3505 (Email: sales@maegen.com) Sales Dept.

725 KW, 1800 RPM, Marathon #573NSS8567 Kohler ES-83704, generator end, 600 Volts, new surplus

Green Industrial LLC, Belgium, WI 262-476-5045 (Email: mike@gibuys.com) Michael Rick

725 KW, Marathon 73RSS4276 Magna Max, 600/346 Volts, 4 lead, PM, DVR2400

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

750 KW, 1800 RPM, Caterpillar #SR-4, generator ends, 680 KW prime, Frame 681, 480 Volts, 1989

Empire Power Systems, Phoenix, AZ 602-333-5619 (Email: Kris.Davenport@empire-cat.com) Kris Davenport

765 KW, Marathon 573RSL6433 Magna Max, 480 Volts, 12 lead, PM, VR-PM500, w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

800 KW, 1200 RPM, Caterpillar SR4, 480 Volts

Field Engine LLC, San Antonio, TX 210-380-5187 (Email: fielden@fieldengine.net) Guy Fielden

800 KW, 1200 RPM, Caterpillar #SR4, 1012 KVA, Arrgt 7C3071

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

800 KW, 1200 RPM, Kato, 480/600 Volts, 1-brg., off Caterpillar D-398

S & W Power Systems & Engine, Oklahoma City, OK 405-677-6637 (Email: Derek@swpowersystems.net) Derek Neher

800 KW, 1200 RPM, Kato #6P6-2150, generator end, 277/4870 Volts, double bearing

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

800 KW, 1200 RPM, Kato #900-493361111, generator end, 600 Volts, sound attenuated enclosure 00

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

800 KW, 1200 RPM, Kato #800-68361111, rebuilt, sound attenuated enclosure 00, rebuilt

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

800 KW, 1200 RPM, Kato #A237340000, generator end, 277/480 Volts, 3-phase, G399TA engine, single bearing, 00 housing, (2 available)

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

800 KW, 1200 RPM, Kato #800-680361111, rebuilt, sound attenuated enclosure 00, 4 wire

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

800 KW, 1200 RPM, Lima #CR874-GM, 480 Volts, generator

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

800 KW, 1800 RPM, Caterpillar #SR4, generator end, 600 Volts, Frame 597, sound attenuated enclosure, 2010

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

800 KW, 1800 RPM, Kato, DP, BB, bless, 600 Volts

Gulf Electroquip Inc, Houston, TX 713-675-2525 (Email: jim@gulfelectroquip.com) Jim Petersen

800 KW, 1800 RPM, Stamford, Frame HC, single bearing, 277 VAC

Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris

800 KW, Kato #6P6-1750, #A241660008, 3 ph/60 Hz, 480 Volts, s/n #10122-02, used

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

820 KW, 1200 RPM, Kato #800kW, 277/480 Volts, generator end, 2003

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

850 KW, 1200 RPM, Caterpillar SR4, 480 Volts, sound attenuated enclosure #00, 7C3073, low hours since new

Pan American Power, Covington, LA 985-893-1271 (Email: eddie@panampower.com) Eddie Boudreau

875 KW, Marathon 574RSS4278 Magna Max, 600/346 Volts, 4 lead, PM, DVR2400

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

900 KW, 1200 RPM, Kato, 480 Volts

Field Engine LLC, San Antonio, TX 210-380-5187 (Email: fielden@fieldengine.net) Guy Fielden

900 KW, 1200 RPM, Kato #900SR9D, generator end, 277/480 Volts, 3-phase

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

900 KW, 1800 RPM, Marathon #MagnaMax-743FSS4932, generator end, 346/600 Volts, sound attenuated enclosure

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

900 KW, 1800 RPM, Gen End, MODEL 743FSS4932, S/N WA-553383-1006, 600 Volts

Collicutt Energy Services, Red Deer, AB 403-309-9250 (Email: norm.bota@collicutt.com) Norm Bota

900 KW, Marathon 574RSL6437 Magna Max, 480 Volts, 12 lead, PM, VR-PM500, w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

902 KW, 1200 RPM, Kato #6P6-2400, generator

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

910 KW, Caterpillar, 1137 KVA, 60 HZ, .8PF, 12 wire, 480 Volts, 2009

E & M Equipment LLC, Longmont, CO 303-736-9424 (Email: ed@2000kw.com) Ed Csapo

975 KW, 1200 RPM, Caterpillar #SR4, generator set, 480 Volts, 3-phase, 6 wire

Midwest Engines & Generators, Edinburgh, IN 337-230-9630 (Email: chris@midwest-generators.com) Chris Ricketts

1000 KW, 900 RPM, Kato, 2400/4160 Volts

M J Lindner Power Equipment, Hemet, CA 951-927-7647 (Email: kilowatts@msn.com) Mike Lindner

1020 KW, 1800 RPM, Caterpillar SR4, 347/600 Volts

Apollo Electric Inc, Houston, TX 713-433-7272 (Email: apolloel@swbell.net) Kerry White

1025 KW, Marathon generator end, 480 Volts

California Power Generation, San Diego, CA 619-618-1255 (Email: sales@calpower.com) Mario Loera

1030 KW, 1200 RPM, Kato #1030, scr, sound attenuated enclosure 00, 600 Volts, rebuilt

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

1030 KW, 1200 RPM, Kato #6P6-2700, sound attenuated enclosure 00, rebuilt

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

1038 KVA, 1500/1800 RPM, ABB AMG400CC04 DAPM, genends, 440 Volts, 2015

Mid-America Engine Inc, Warrior, AL 205-590-3505 (Email: sales@maegen.com) Sales Dept.

1050 KW, 1200 RPM, Kato, 2 bearing, no J box, 4160 Volts

A & H Armature Works, Inc, Westwego, LA 504-347-3781 (Email: ahmail@bellsouth.net) Harry Atwood

1050 KW, 1200 RPM, Kato, DP, 2 BB, blesss, 600 Volts

Gulf Electroquip Inc, Houston, TX 713-675-2525 (Email: jim@gulfelectroquip.com) Jim Petersen

1050 KW, 1200 RPM, Kato #A261080900, 2-brg., 1500 KVA, brushless, 347/600 Volts

GlobalTech Motor & Controls, Inc., Houston, TX 281-487-9300 (Email: Frank@globaltechmotors.com) Frank Stockstill

1050 KW, 1200 RPM, Kato #6P6-3150-SCR, generator, rebuilt, sound attenuated enclosure 00

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

1050 KW, 1200 RPM, Kato, 600 Volts

Field Engine LLC, San Antonio, TX 210-380-5187 (Email: fielden@fieldengine.net) Guy Fielden

1050 KW, 1200 RPM, Lima #795728-0A, rig runner, sound attenuated enclosure 00, rebuilt

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

1050 KW, 1200 RPM, Toshiba, .7 PF, Drip-Proof Ball Bearing, 600 volt, Wye

Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris

1050 KW, 1200 RPM, Cat & Kato #6P6-3150, 347/600 Volts, 1-brg/2-brg., off Cat D399TA (3 available)

S & W Power Systems & Engine, Oklahoma City, OK 405-677-6637 (Email: Derek@swpowersystems.net) Derek Neher

1051 KW, 1200 RPM, Kato #6P6-3150, generator, rebuilt

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

1100 KW, Marathon #575RSL4044, sound attenuated enclosure, single wall fuel tank, 277/480 Volts, 2002

Martin Energy Group Svcs, Tipton, MO 717-738-0300 (Email: bmartin@martinenergygroup.com) Brian Martin

1120 KW, Kato #AA28999000, generator end

Mustang Cat Power Systems, Houston, TX 713-452-7438 (Email: jparedes@mustangcat.com) Jason Paredes

1130 KW, 1800 RPM, Marathon 575NSL8044 5M4044B SAE00, generator end, 12 lead, 480 Volts, new

Green Industrial LLC, Belgium, WI 262-476-5045 (Email: mike@gibuys.com) Michael Rick

1140 KW, 1800 RPM, Kato, 347/600 Volts

Apollo Electric Inc, Houston, TX 713-433-7272 (Email: apolloel@swbell.net) Kerry White

1160 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

1200 KW, Marathon 742RSS4286 Magna Max, 600/346 Volts, 4 lead, PM, DVR2400

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

1204 KW, 1200 RPM, Kato #A270980002, generator end, 346/600 Volts, 3-phase

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

1225 KW, 1200 RPM, Kato, 600 Volts, 3 phase, 0.7 PF 2-Bearing 6-wire AC

S & W Power Systems & Engine, Oklahoma City, OK 405-677-6637 (Email: Derek@swpowersystems.net) Derek Neher

1225 KW, 1200 RPM, Kato #AA27673008, generator end, 346/600 Volts, 3-phase

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

1225 KW, 1200 RPM, Kato #AA27673013, generator end, 346/600 Volts, 3-phase, 2012

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

1250 KW, 1200 RPM, Kato #AA28882000, 277/480 Volts, 3-phase

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

1250 KW, 1800 RPM, Kato, DP, 2 BB, bless, 2400/4160 Volts

Gulf Electroquip Inc, Houston, TX 713-675-2525 (Email: jim@gulfelectroquip.com) Jim Petersen

1250 KW, 1800 RPM, Stamford, Generator End, 1563 KVA, 480/277 Volts, New

Collicutt Energy Services, Red Deer, AB 403-309-9250 (Email: norm.bota@collicutt.com) Norm Bota

1300 KW, 1800 RPM, Kato #AA29006000, generator end, 346/600 Volts, sound attenuated enclosure 00, 2013

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

1300 KW, Marathon 740RSL4048 Magna Max 480 Volts, 4 lead, PM, DVR2400 w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

1306 KW, 3625 RPM, General Electric Induction Generator, 4160 Volts, Frame 8411Z, cont duty, weather protected enclosure type 2 SB, Custom 8000

Doug Beat Co The, Toledo, OH 419-865-4001 (Email: sales@dougbeat.com) Doug/ Chris

1332 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

1400 KW, 1800 RPM, Caterpillar, 12470 Volts, 2 bearing Caterpillar generator

Apollo Electric Inc, Houston, TX 713-433-7272 (Email: apolloel@swbell.net) Kerry White

1400 KW, 1800 RPM, IEC #1400, generator end, 480 Volts, 3-phase, Detroit 16V149 engine

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

1400 KW, Marathon 743RSS4288 Magna Max, 600/346 Volts, 4 lead, PM, DVR2400

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

1410 KW, 900 RPM, Baylor, 4160 Volts

Apollo Electric Inc, Houston, TX 713-433-7272 (Email: apolloel@swbell.net) Kerry White

1450 KW, 1800 RPM, Caterpillar SR4, 4160 Volts

Field Engine LLC, San Antonio, TX 210-380-5187 (Email: fielden@fieldengine.net) Guy Fielden

1500 KW, 1200 RPM, Kato #800SR9D, 480 Volts, sound attenuated enclosure 00, 6 wire

LarMar Industries Inc., Midland, TX 432-561-8700 (Email: jlarson@larmarindustries.com) John Larson

1500 KW, 1200 RPM, Kato, generator end, 600 Volts, 3-phase, Caterpillar 3516 engine, (4 available)

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

1500 KW, 1200 RPM, Kato #6P7-2050, generator end, 1875 kVA/1500 kW continuous, 600 Volts (4 available)

NineX Power Systems, Spring, TX 281-813-4923 (Email: Jconine@ninexpower.com) John Conine

1500 KW, 1200 RPM, Kato, generator end, 600 Volts, 3-phase, Caterpillar 3512B engine, double bearing (4 available)

Swift Equipment Solutions, Houston, TX 713-929-2056 (Email: sales@swiftequipment.com) Josh Kramer

1500 KW, 1800 RPM, Caterpillar SR5, 4160 Volts, P/N 461-3356

Mid-America Engine Inc, Warrior, AL 205-590-3505 (Email: sales@maegen.com) Sales Dept.

1500 KW, 1800 RPM, Caterpillar #SR4B, generator set, 2400/4160 Volts, 3-phase, 2008

Midwest Engines & Generators, Edinburgh, IN 337-230-9630 (Email: chris@midwest-generators.com) Chris Ricketts

1500 KW, 1800 RPM, Kato, continuous, 2400/4160 Volts

Power Generation Enterprises, Canyon Country, CA 818-484-8550 (Email: sales@powergenenterprises.com) Victor Seropian

1500 KW, 1800 RPM, Marelli #MJH500 MB4

Mid-America Engine Inc, Warrior, AL 205-590-3505 (Email: sales@maegen.com) Sales Dept.

1500 KW, 1800 RPM, WEG, single bearing, 220/480 VAC

AmeriMex Motor & Controls, LLC, Houston, TX 800-550-4374 (Email: wade@amerimexinc.com) Wade Stockstill

1500 KW, Marathon 742RSL4050 Magna Max 480 Volts, 4 lead, PM, DVR2400, w/warranty, new

Ring Power Systems, Saint Augustine, FL 904-737-7730 (Email: lyndon.schultz@ringpower.com) Lyndon Schultz

1555 KW, 1800 RPM, Caterpillar #SR4B, diesel generator end, 346/600 Volts, 3-phase, 187 Amps., sound attenuated enclosure 00, 2014

DEPCO Power Systems, Houston, TX 800-723-3726 (Email: dick@depco.com) Dick Davis

2500 KW, 900 RPM, Ideal, SAB, Frame 21320, 2 bearing, 0.8 S.F.,480 Volts, 1250 hours, Frame BE-14-5 rated KW output, Brushless exciter type FRBA, 1973

Wabash Power Equipment Co, Wheeling, IL 847-541-5600 (Email: info@wabashpower.com) Michael Pfeiler

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search